loading
reading
writing
saving
searching
WORK Wheels VSXX 20 - $3,800
QR Code Link to This Post
Front: 20x10.5 +19 A disk, 97mm lip
Rear: 20x11.5 +29 O disk, 109mm lip
5x114.3, drilled for 14mm lug
73mm Center bore
Gold face, Black bolts, Standard polish lip, Standard barrel
Additional rear hole for TPMS
Tesla TPMS (non-Bluetooth)
Falken Azenis FK-510 Tires
No damage on any of the faces. Lips have normal wear and tear from daily driving, minor rock chips etc. one rear wheel has some minor rash in 2 spots on the outer lip, close up pictures provided. One of the front outer lips were replaced due to hitting a pothole which caused a slight bend, it was still holding air just fine but didn't look good cosmetically so i replaced it with a new Work Wheels Outer lip, photo of old lip provided. I will throw in the extra lip with the sale, i was told by multiple shops it was repairable but i went with a new original work wheels lip instead.
I am the original owner purchased back in 2021, they have about 20k miles on them. These are spec'd out for a Tesla Model 3 on air suspension(airbags). This is an aggressive setup but you get bigger lips that other setups dont have. you will need 3mm spacers in the front to clear the calipers if you have a performance Model 3, these will probably fit a Model Y as well but you will have to confirm yourself.
CASH only
I have included some pictures of them on my car to give you an idea what they look like on the car, 2019 Tesla Model 3 Performance
Can include Project Kics Iconix Neochrome lug nuts & locks for additional $400
I have more photos of the rear barrels/tires if you DM me. FB has a limit of only 10 photos allowed
work wheels rays engineering enkei konig tsw bbs rotiform esr gram lights kansei japanese