From website:
"The DASH2 is one of Race Technology’s most popular products. Housed in a sealed die-cast case, the DASH2 can be used either standalone or with our range of ECU interfaces and data logging products. It is fully road legal, but also used extensively in race applications.
When used in standalone mode, the DASH2 can connect to four sensor inputs, for example water temperature, oil pressure, fuel level and boost pressure. These sensors can be from Race Technology, or almost any 3rd party sensor. It also has inputs for RPM, speed, non-resettable odometer and warning lights for full road legal operation.
When connected to an ECU using one of our interfaces, the DASH2 can display any of the channels output by the ECU. The channels depend on the ECU model, but normally include throttle position, boot pressure, exhaust lambda, air temperature etc.
When the DASH2 is connected to one of our data loggers, it can be further configured to display many more parameters including real time lap and sector times calculated from GPS data, any available analogue measurements (e.g. temperatures and pressures), RPM, wheel/shaft speeds etc. The actual data displayed can be set up for the user's specific requirements. You can also set independent alarms for all channels.
The DASH2 features:
Compact, slim, flat and easy to install diecast aluminium enclosure
Road legal, everything required for an MOT or SVA testing
High contrast, high visibility custom LCD display with EL backlight.
Configurable RPM bargraph with user defined scale and shift lights
4 analogue inputs - channel naming and scaling are fully user-configurable
Non resettable and trip odometer
Gear position indicator
Configurable alarms on all input channels
Inputs for four external switches to control operation and some setup options
Warning lights for headlight main beam, left and right indicator, rear fog light, alternator output and brake malfunction
Set up in mph/miles or km/h / km
5 user defined screens of data
5V reference output to drive external sensors"
Race Technology Video 4 logger/video recorder. This was priced new at $1,400.
From the website:
"VIDEO4 is a powerful and configurable combined video/data logger.
The VIDEO4 is designed to integrate seemlessly with our other products including our dataloggers and displays. In the case that when the VIDEO4 is used with a data logger, then the data logger simply becomes a "data source" which feds data to the VIDEO4 unit, there is no need to have a flash card in the data logger and there is no need to access it. All the data and the video are recorded on the flash card in the VIDEO4 unit. The Video and Data are perfectly synchronised so that the user will be able to analyse them side by side using RT Analysis Software.
The VIDEO4 combines the 4 video streams and overlays the graphics in real time so only a single video stream is stored on the flash card. The video is recorded at a very high quality and stored in standard DVD format, either PAL or NTSC as required.
The complete video/data system has been optimised with simplisity and speed in mind. For the first time it means that video and data can be analysed quickly and simply, with almost no additional overhead compared with data alone.
Once the logging/recording is complete the flash card can be taken from the unit and then used in our powerful analysis software, to instantly generate a DVD or simply played back using our own video player software.
The unit was initially designed for automotive applications such as circuit racing cars, rally cars, hill climb cars and road cars. However it is also ideally suited to use in other applications such as power boats and motorbikes. The unit may be used for all types of car testing within the auto-industry and can provide a vital tool for road safety and race training within driving schools."