Stratasys F120 FDM 3D Printer
We are selling our Stratasys F120 3D printer. This printer is fully functional and originally purchased in 2020 for $20k. This printer is incredibly reliable and requires very little maintenance. The printer odometer is currently at ~1650 hours of use with the original hot ends. As the images show, the printer is currently showing that the extrusion heads should be replaced, however they still print without issue. However, two brand new replacement hot ends are included that we bought but have not yet been installed. These are worth $1200 each. This printer can print with either Stratasys ABS-M30 or ASA and uses SR-30 support material. Also included is the SCA 1200HT bath to remove SR-30 support material from the models (originally worth $3800). The bath is also fully functional.
*Formlabs 3D printer/wash station in images is NOT included as part of sale*
Full Specs:
F120
SCA1200HT
Included Items:
1X Stratasys F120 FDM printer
2X Stratasys F series Diran extrusion heads
1X SCA1200HT bath
28X build plates (roughly half of them have never been used)
9X bottles of Stratasys WaterWorks P400 soluble support remover (each bottle typically sells for $180)
You are welcome to take any material we have left at the time of sale but we may have very little or none remaining.
ALSO IMPORTANT TO NOTE: If you are interested you would have to have your own fork lift and methods to pick it up, we do not have that handy to us.