loading
reading
writing
saving
searching
Mark-10 M5-20 Force Gauge - $1,000 (san mateo)
Borden near Roberta
QR Code Link to This Post
Ruggedly built for many years of service in laboratory and industrial environments, this force gauge features an ergonomic, reversible aluminum design to allow for handheld use or test stand mounting for more sophisticated testing requirements. Additionally, it is overload protected to 200% of capacity, and an analog load bar is displayed for graphical representation of an applied force.
Features
High-speed 7000 Hz sampling rate
USB, RS-232, Mitutoyo, and analog outputs
Large backlit graphic display
1000-point data memory with statistics and outputs
Live load bar graph with set point markers
Programmable set points, with indicators and outputs
Peak readings and set points always displayed
Averaging mode - calculates average readings over time
External trigger mode - for switch contact testing or remotely stopping display update
Automatic data output via USB/RS-232
Five selectable units of measurement
Configurable audio alarms and key tones
Password protection, configurable for individual keys and calibration
Applications
Laboratory
Industrial
Tension and compression force testing
Capacity x Resolution
20 x 0.005 lbF
320 x 0.1 ozF
10 x 0.002 kgF
10,000 x 2 gF
100 x 0.02 N
Accuracy
±0.1% of full scale
Sampling Rate
7000 Hz
Safe Overload
200% of full scale (display shows "OVER" at 110% and above)
Outputs
USB/RS-232: Configurable up to 115,200 baud; includes Gauge Control Language 2 for full computer control
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices
Analog: ±1 V DC, ±0.25% of full scale at capacity
General purpose: Three open drain outputs, one input
Set points: Three open drain lines
Load Cell Deflection
0.010 (0.25)
Configurable Settings
Digital filters
Outputs
Automatic output (via USB/RS-232)
Automatic shutoff
Default settings
Averaging mode
External trigger
Passwords
Key tones
Audio alarms
Backlight
Calibration
Environmental Requirements
40 to 100°F (4 to 38°C), maximum 96% humidity, non-condensing
Power
AC adapter: 100 to 240 V AC, 50 to 60 Hz, 0.3 A
Battery: Rechargeable 8.4 V NiMH
Low battery indicator appears when battery level is low, and gauge powers off automatically when power reaches critical stage
Battery Life
Backlight on: Up to 7 hours of continuous use
Backlight off: Up to 24 hours of continuous use
Thread
#10-32M UNF
Dimensions
2.53 x 1.32 x 6.74" (64.3 x 33.6 x 171.2 mm)
Weight
1 lbs (0.45 kg)
What's included
Force Gauge
Certificate of Calibration with Data
Extension Rod
Cone Attachment
Chisel Attachment
V-Groove Attachment
Flat Attachment
Hook Attachment
USB Cable
Carrying Case
Battery
AC Adapter
Quick Start Guide
Three-Year Warranty
Warranty Registration Card
Additional Info
Data Sheet - https://mark-10.com/downloads/product-downloads/DataSheetSeries5.pdf
Video - https://mark-10.com/downloads/product-downloads/Series_5.mp4
User's Guide - https://mark-10.com/downloads/product-downloads/manualSeries5.pdf
Quick Start Guide - https://mark-10.com/downloads/product-downloads/QuickStart_ForceGauges.pdf