6 Martin 5x5 LED DMX Panel - photo/video - by owner - electronics sale

6 Martin 5x5 LED DMX Panel - $2,500 (Daly City)

QR Code Link to This Post

$2500 is for 6 Panels.
1 panel was not in photo
In Great condition very low hours and everything works

FEATURES

White LED strobe/blinder

5 x 5 matrix panel

Individually controllable LEDs

Preprogrammed macros (effects, letters, numbers, etc.)

Linkable - integrated horizontal and vertical locking

DMX or sound activated

Multiple DMX control options

3 & 5 pin XLR

SPECIFICATIONS

PHYSICAL

Length: 500 mm (19.7 in.)

Width: 101 mm (4.0 in.)

Height: 500 mm (19.7 in.)

Weight: 9.5 kg (20.9 lbs.)

DYNAMIC EFFECTS

Strobe effect: Electronic, with regular and random pulse, burst and strobe effects

Pre-programmed effects: Effect, letter and number display macros

Electronic dimming: 0 - 100% continuous, individually dimmable pixels

Effects orientation: Standard or inverted 180°

CONTROL AND PROGRAMMING

Control options: DMX, stand-alone

DMX channels: 4/25/29

Stand-alone trigger options: Music trig, auto trig

Stand-alone sequences: 8 pre-programmed shows or random show

Stand-alone memory: 20 scenes

Setting and addressing: Control panel with LED display

DMX compliance: USITT DMX512/1990

OPTICS

Light source: 25 x 5 W Cree cool white LEDs

Color temperature: 6000 - 6500 K

Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer´s test conditions

CONSTRUCTION

Color: Black

Housing: Steel

Protection rating: IP20

INSTALLATION

Location: Indoor use only, must be fastened to surface or structure

Mounting points: Integral hanging brackets (removable), side-by side mounting locks

Orientation: Any

CONNECTIONS

AC power in/thru: Neutrik PowerCon

DMX data in/out: 3-pin and 5-pin locking XLR

ELECTRICAL

AC power: 100-240 V nominal, 50/60 Hz

Typical total power consumption: 148 W

Power consumption figures are typical, not maximum. Allow for +/-10% variation.

TYPICAL POWER AND CURRENT

110 V, 60 Hz: 2.0 A, 148 W

230 V, 50 Hz: 1.2 A, 146 W

Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

THERMAL

Cooling: Forced air (temperature-regulated, low noise)

Maximum ambient temperature (Ta max.): 40° C (104° F)

Minimum ambient temperature (Ta min.): 0° C (32° F)

Total heat dissipation (calculated, +/- 10%): 510 BTU/hr.

APPROVALS

EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493

EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547

US EMC: 47 CFR Part 15 Class A

Canadian EMC: ICES-003 Class A

Australia/NZ: C-TICK N4241

CE ETL C US Intertek

INCLUDED ITEMS

Power cable 1.5 m

Mounting brackets incl. screws

ACCESSORIES

Cables, 16 A, for connection to power in chains

Power input cable, 14 AWG, UL, SJT, 1.5 mm2 , H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508

Power relay cable, 14 AWG, UL, SJT, 1.5 mm2 , H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509

Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510

Power relay cable, 14 AWG, UL, SJT, 1.5 mm2 , H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511

Power connectors

Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804

Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805

post id: 7891156047

posted: 2025-10-25 11:16

updated: 2025-11-07 08:07

♥ best of ^[?]

reading

writing

saving

searching

refresh the page.