This dishwasher is:
- 8 years old,
- approximately 24" wide, 34" high, 23" deep
- showing error code E:03 (faulty heat pump),
- is made for a front panel and is being sold without the front panel (the cream panel you see in the photos will be removed), and
- is located in El Granada, CA.
Info copied from Grok AI below:
The error code almost always points to a fault in the heating circuit — most commonly a failed heating element integrated into the circulation pump/heat pump assembly. The dishwasher will run but won't heat the water properly, leading to poor cleaning, no drying, and ineffective cycles.
Common fix: Replace the heat pump/motor assembly (which includes the built-in heater). Parts cost $100–$300 (often $130–$200 DIY from sites like eSpares or Bosch parts suppliers), and many people (not us) can do this repair themselves following online guides.
Professional repair: $280–$500+ (including labor, which can be $120–$300 alone).
Without repair, it's essentially a non-functional or very limited-use dishwasher (cold washes only, no proper sanitizing or drying).