loading
reading
writing
saving
searching
NEW! EVERLAST PLASMA CUTTER IPT-100 - $50 (Sacramento)
El Camino Ave. near Near Watt Ave.
QR Code Link to This Post
I'm selling a brand new IPT100 (100 amp) plasma torch with a 25 foot cable. It has a euro style four pin connector. This torch is used on newer plasma cutters that use the blowback start and doesn't use high frequency like older machines. It has four pins active #1 and #9 are short pins and #4 and #7 are long pins. The torch itself can be removed and mounted in place of yours too. Call Tony at show contact info
From a search on the Internet:
The IPT100 is widely used with machines from brands like Everlast and others that utilize a similar interface and starting technology. Compatible models include:
Everlast PowerPlasma Series: Specifically the 2015 and newer PowerPlasma 100S and 102i models. The torch may also be compatible with the PowerPlasma 80S and 82i models.
Other Brands: It can be used with various generic "CUT100" models and certain Avortec XC 100A plasma cutters.
Torch Model: IPT100 (or PT100/PTM100, which are often interchangeable names for the same design).
Connector Type: 4-pin Euro-style central adapter.
Amperage Rating: 100 Amp, suitable for cutting material 1" to 1-1/2" thick depending on the machine.
Arc Starting Method: Non-HF (blow-back) ignition system, which reduces electromagnetic interference and is essential for compatibility with certain machines.
Cable Length: 25 feet.
From a search on the Internet:
The IPT100 is widely used with machines from brands like Everlast and others that utilize a similar interface and starting technology. Compatible models include:
Everlast PowerPlasma Series: Specifically the 2015 and newer PowerPlasma 100S and 102i models. The torch may also be compatible with the PowerPlasma 80S and 82i models.
Other Brands: It can be used with various generic "CUT100" models and certain Avortec XC 100A plasma cutters.
Torch Model: IPT100 (or PT100/PTM100, which are often interchangeable names for the same design).
Connector Type: 4-pin Euro-style central adapter.
Amperage Rating: 100 Amp, suitable for cutting material 1" to 1-1/2" thick depending on the machine.
Arc Starting Method: Non-HF (blow-back) ignition system, which reduces electromagnetic interference and is essential for compatibility with certain machines.
Cable Length: 25 feet.